TelevisionBRAVIA 3 II

Connecting terminal

The availability of terminals and types or shapes of connectors may vary depending on your TV.
For the label and location of the terminals, refer to the Setup Guide (printed manual).

The Setup Guide can also be downloaded from the Support Site.

Terminal label Description

Image of USB port

USB

Connects to Digital still camera/Camcorder/USB storage media.

Note

  • Connecting a large USB device may interfere with other devices connected next to it. In such a case, connect it to the other USB input.

Image of REMOTE IR IN jack

REMOTE RS-232C / REMOTE IR IN

Connects to the Home Controller. These jacks are for receiving the external control signal. Enables extended control of the TV using RS-232C via the RS-232C and IR IN jacks. RS-232C: Connects to the RS-232C terminal of the home controller. IR IN: Connects to the IR out terminal of the home controller.

Note

  • Take care to not connect to headphones or an audio system.

Image of HDMI IN SUPPORT 4K 120p port

HDMI IN (4K 120 Hz)

Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable.

To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

Note

  • 4K 100 Hz support depends on your country/region.

Image of HDMI IN eARC/ARC port

HDMI IN (eARC/ARC)

To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labeled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).

Hint

  • There may be three tactile dots next to the HDMI input terminal depending on your model. Use them as a guide during installation.

Image of DIGITAL AUDIO OUT (OPTICAL) jack

DIGITAL AUDIO OUT (OPTICAL)

Connects to an audio system with optical audio input.
When connecting an audio system not compatible with eARC/ARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
For details, refer to Digital optical cable connection in Connecting an audio system.

Image of Cable/Antenna input terminal

(Cable/Antenna input)

Connects to Cable/Antenna/External Box.

Note

  • When connecting the cable to the Cable/Antenna input, finger tighten only. Over tightening the connection can damage the TV.

Image of LAN port

LAN

Connect to a Router.
Connect to the Internet using a LAN cable.
Go to Page Top